DSP Logger Expert | 6CH Vibration Analyzer

Description

Now you can measure spectrum from 400 up to 25,600 lines and wave forms from 512 up to 16,384 samples. capturing acceleration, velocity, displacement and envelope, both AC and DC.
The DSP Logger Expert is a data collector. multichannel, FFT Analyzer made for Predictive Maintenance and machine diagnostics.
The instrument can measure, process, show and store a wide variety of analysis modes. It can work as standalone or you can download the measurements your PC via its software.
Customers in Latin America already have been relying on the cost/benefit relationship of these units for over 30 years, as well as 700 units of it’s predecessor, the DSP Logger MX300.
This new unit has a 640 x 480 resolution screen, 5″ color display and High Contrast, to better handle direct sun light, It also has a sturdy keyboard with easy to find keys and four dedicated function keys in each mode of operation.
Vibration Measurement
Bearing Measurement
Bearing Condition
Lubrication
High Peaks
Trending
Spike Energy®
Amplitude by failure frequencies
Spike Energy® State
Trend
ISO 10816 Measurement
ISO 10816 Status
Balancing Status
Alignment Status
Looseness Status •
Trend
Dual Channel
Bearing Condition
Mechanical, ISO Condition
Dual channel recording Function
Data Collector
Multilocation polling Route-equipment-point-measurement Route visualization tools
Route regeneration of unmeasured points Route history, including last 5 captures Mechanical status tools
Equipment diagram Equipment pictures
Automated function: quick or detailed Alarm system in spectrum or scalar Manual measurement status system
Machine Balancing
Single Plane Balancing
Dual Plane Balancing
No-Phase Balancing
Dual Channel spectrum
Calculations to add or subtract weight Final Correction Report
Vibration Phase Analysis
Relative Phase Measurement
Absolute Phase Measurement
Samples to measure and position sensors Includes:
Polar Graph
Phase Trend
Dual Channel WaveForm
Report Generator
Expert Analysis
Multichannel Spectrum Measurement Electrical Rotor Analysis
Bode Graphics
Bump Test
Orbital Function with or without filtering Configurable Spectrum cascade Crossreference Spectrum
Programable Condition Monitor Function Human Body vibration measurement
Input channels: six
Input sources: Acceleration, AC/DC sensors Amplitude accuracy: 1%
Resolution: Programmable 400, 800, 1600, 3200, 6400, or 25600 lines
Measurement windows: Henning, Flat top, Rectangular
Preprocessing gSE and ESP enveloping (demodulator) with four selectable input filters for enhanced bearing and gear mesh fault detection
Digital Integration:
Velocity and Displacement, with high-pass filters Programmable 1%, 5% and 10% of Fmax filters:
1.25 2.5 KHz
2.5 5 KHz
5 10 KHz
Frequency range: 0.2Hz to 20Khz Low-frequency cutoff 0.18…70 Hz
USB Communication with SMP ActiveSync Wifi (optional)
Memory: Internal RAM 128 MB MicroSD: 2GB
Trigger modes: Trigger: External or Laser Tach Trigger Level: Fixed or Automatic
Ext Trig Slope: Amplitude and Slope
Data Displays six-channel spectrum, six-channel time, phase table, orbit, process, cross channel phase, dual spectrum, time plots, and two tri-axial plots
Averaging Programmable from 1…4096
Spectral, synchronous time, peak hold, and continuous
Display: LCD, backlit color
VGA (640 x 480) 5.7 viewable area
Casing: IP 65/DIN EN 60529 Aluminium
Input connectors:
Connector A and Connector B are 5-pin AMPHENOL Connector A: Channel 1, 3 and 5
Connector B: Channel 2, 4 and 6
Microprocessor 533 MHz Samsung S3C6410 (max freq. 667 Mhz)
DSP processor Analog Devices
Battery: Rechargeable lithium ion Weight, approx. 715 g (1.52 lb)