Fluke 805 FC Vibration Meter mechanical troubleshooting and maintenance

Description

Innovative sensor design minimizes measurement variations caused by device angle or contact pressure
Consistent data quality at both low and high frequency ranges
Four-level severity scale assesses urgency of problems for overall vibration and bearing condition
Exportable data via USB
Trending in Microsoft® Excel using pre-built templates
Overall vibration measurement (10 Hz to 1,000 Hz) for acceleration, velocity and displacement units of measurement for a wide variety of machines
Crest Factor+ technology provides reliable bearing assessment using direct sensor tip measurements between 4,000 Hz and 20,000 Hz
Compare vibration levels with ISO-10816 severity scales and store results to the Fluke Connect Cloud
Get authorization to take next steps in an instant if machine health is at risk via Fluke Connect™ Share-Live™ video call*
Colored lighting system (green, red) and on-screen comments indicate how much pressure needs to be applied to take measurements
Temperature measurement with Spot IR Sensor increases diagnostic capabilities
On-board memory holds and saves up to 3,500 measurements
External accelerometer support for hard to reach locations
Flashlight for viewing measurement locations in dark areas
Large screen with high resolution for easy navigation and viewing
Specifications
Low frequency range (overall measurement)
10 Hz to 1,000 Hz
High frequency range (CF+ measurement)
4,000 Hz to 20,000 Hz
Severity levels
Good, satisfactory, unsatisfactory, unacceptable
Vibration limit
50 g peak (100 g peak-peak)
A/D converter
16-bit
Signal to noise ratio
80 dB
Sampling rate
Low frequency: 20,000 Hz
High frequency: 80,000 Hz
Real time clock backup
Coin battery
Sensor
Sensitivity
100 mV g ± 10%
Measurement range
0.01 g to 50 g
Low frequency range (overall measurement)
10 Hz to 1,000 Hz
High frequency range
4,000 Hz to 20,000 Hz
Resolution
0.01 g
Accuracy
At 100 Hz ± 5% of measured value
Amplitude Units
Acceleration
g, m/sec²
Velocity
in/sec, mm/sec
Displacement
mils, mm
Infrared Thermometer (Temperature Measurement)
Range
-20 °C to 200 °C (-4 °F to 392 °F)
Accuracy
±2 °C (4 °F)
Focal length
Fixed, at ~3.8 cm (1.5")
External Sensor
Note: Fluke supports but does not provide external sensors
Frequency range
10 Hz to 1,000 Hz
Bias voltage (to supply power)
20 V dc to 22 V dc
Bias current (to supply power)
Maximum 5 mA
Firmware
External interfaces
USB 2.0 (full speed) communication
Data capacity
Database on internal flash memory
Upgrade
Through USB
Memory
Up to 3,500 measurements
Radiated Emission
Electrostatic discharge: burst
Standard EN 61000-4-2
Electromagnetic interference
Standard EN 61000-4-3
RE
Standard CISPR 11, Class A
Environmental
Operating temperature
-20 °C to 50 °C (-4 °F to 122 °F)
Storage temperature
-30 °C to 80 °C (-22 °F to 176 °F)
Operating humidity
10% to 95% RH (non-condensing)
Operating/storage altitude
Sea level to 3,048 meters (10,000 feet)
IP rating
IP54
Vibration limit
500g peak
Drop test
1 meter
General Specifications
Battery type
AA (2) Lithium Iron Disulfide
Battery life
250 measurements
Size (L x W x H)
24.1 cm x 7.1 cm x 5.8 cm
(9.5 in x 2.8 in x 2.3 in)
Weight
0.40 kg (0.89 lb)
Connectors
USB mini-B 7-pin, external sensor jack (SMB connector)
Includes:
Including :
USB cable*1
Storage case*1
Belt holster*1
Quick reference guide*1
CD-ROM (includes MS Excel template and documentation)*1
Notice:
The standard package don't include batteries.Because,the international air shipping forbid to ship liquid,powder and batteries,we can not put them in the package box.Hope you can understand buy them in your local store or supermarket.Thanks for your support!
Shipping:
We will ship all items within 1-3 working days upon receipt of payment,our goal is: ship it as fast as we can.
Standard Shipping: To USA,UK and Australia by ePacket,need 7-12 working days.
Expedited/Standard Int'l Shipping by Fedex,DHL,TNT and EMS courier: To USA,need 3-6 business days,To other countries,need 4-8 business days normally.But sometimes int'l delivery is highly depended on the courier company and local customs/duties.
Import duties and taxes are not included in the item price or shipping charges.These charges are the buyer responsibility.
Warranty&Reture Policy:
We encourage all customers to communicate with us through eBay messages. If you have any questions or comments whatsoever regarding our products or listing, we are waiting to hear from you
A 1 year warranty is offered for this product.If the product malfunctioned under proper usage per instructions
manual within the warranty period, please contact us to obtain shipping instructions and send it back at your shipping costs.
30 days evaluation and investigation takes placed after receiving your return item.A brand new replacement unit will be sent to you at our shipping costs if it meets our warranty requirements.
On Feb-05-20 at 16:37:58 PST, seller added the following information: