Pocket VibPro | Smart Vibration Meter (Full edition)

Description

Only the "400" versions of the VibPro can upgrade to balancing
This unit includes:
Pocket VibPro + Analyzer and meter firmware + data collector
Spiral cable for vibration sensor
Multipurpose accelerometer sensor, 100 mV/g
Carrying case
Battery charger
DSP Machinery Control EX (Software)
The Pocket VibPro Vibration Meter is the most reliable, and affordable vibration screening device available
for frontline mechanical troubleshooting teams that need repeatable, severity-scaled readings of overall
vibration and bearing condition.
Consistent data quality at both low and high frequency ranges
Color scale indicates severity of problems for overall vibration and bearing condition
Use your existing Microsoft® Excel built-in templates for trending. Save money on software
Overall vibration measurement (0.5 Hz to 20 kHz) for acceleration, (0.5 Hz to 2,000 Hz) velocity and
displacement units of measurements for a wide variety of machines RMS, 0-Peak, Peak to Peak and Crest
Factor measurements
On-board memory holds up to 25,000 measurements Audio output for listening to bearing tones directly
Large screen with high resolution for easy navigation and viewing (3.5” LCD display)
Use the Pocket VibPro to check the following machine categories:
Chillers (refrigeration)
Fans
Cooling tower drives
Centrifugal pumps
Positive displacement pumps
Air compressors
Blowers
Generic gearboxes (rolling element bearings)
Machine tools (motor, gearboxes, spindles, etc.)
Trend the readings with the pre-built Microsoft® Excel templates and plot graphs
Compare the overall vibration readings to ISO Standards (10816-2,3,4,5,6,7)
The Pocket VibPro is a simple to use vibration monitoring and analysis
tool that allows easy display of vibration signals. It also shows vibration
spectrums.
The meter automatically performs vibration analysis functions based on
machine running speed to help diagnose faults such as unbalance,
misalignment and looseness.
Features
Standard cable mounted accelerometer with magnet
Built-in Bluetooth / wi-fi communication capability
Dual charging modes: Docking station or USB port
USB Port to download data to PC
ISO built-in Alarms
Easily identify bearing and lubrication problems
Easily identify problems with built-in band filters:
1X (unbalance) 2X (misalignment) 3X (looseness)
400, 800, 1600 and 3200 line FFT (spectrum) Ruggedized
IP65 case 2-year
Limited Warranty**
Specifications
Size Length 6.8″ (172 mm)
Width 3.6″ (92 mm)
Height 1.5″ (39 mm)
Operating temperature 0°C to 50°C
Battery life: Typically 12 hours continuous,depending on brightness setting
Auto power OFF
Frequency range: 0.5 Hz to 15,000 Hz
Max frequency resolution: 0.03 Hz @ 3200 lines FFT setting
Acceleration in g Velocity in (or ) inch/s mm/s Displacement (mm, microns, inch)
Dynamic range:102 dB (0.001g resolution)
Standards:
RoHS compliant
REACH compliant